fbpx
Products
Products

Pioneer TS – W311D4 Subwoofer

Php 6,800.00
This subwoofer brings great flexibility thanks to its 4Ω dual voice coil, which allows you to opt for a 2Ω or 8Ω set-up (provided that there is correct power matching between the sub and your amp). The TS-W311D4 delivers up to 1400 Watts and is suitable for enclosed use.
INQUIRY FORM

Features & specs

Size 12 -inch
Impedance 2 ohms or 8 ohms
Cone Material IMPP
Surround Material Fiber Reinforced Polymer
Ideal Sealed Box Volume (cubic feet) 1.25
Ideal Ported Box Volume (cubic feet) 1.5
Port diameter (inches) 3
Port length (inches) 6.5
Free-Air No
Dual Voice Coil Yes
Sensitivity 95 dB at 1 watt
Frequency Response 20 – 125 Hz
Max RMS Power Handling 400
Peak Power Handling (Watts) 1400
Top Mount Depth (inches) 6
Bottom Mount Depth (inches) N/A
Cutout Diameter or Length (inches) 11 1/16
Vas (liters) 32.7
Fs (Hz) 43
Qts 1.05
Xmax (millimeters) 10.8

 

Product Research

Features

Woofer: The Pioneer Champion series TS-W311D4 features an IMPP (Injection Molded Polypropylene) cone. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. The cone is lightweight and rigid for low distortion and superior bass response.

Surround: The surround is made of dual-layer, fiber reinforced elastic polymer.

Dual 4Ω Voice Coils: This woofer features two 4Ω voice coils that offer wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2Ω load. When the voice coils are wired in series, the woofer presents an 8Ω load.

Terminals: Both sets of the woofer’s spring compression binding post terminals are side-by-side for easy wiring. Each post will accept a pin connector, a single banana plug, or bare wire up to 10-gauge.

Double-stacked Magnet: The woofer uses double-stacked magnets to create a powerful magnetic force. This increases the control exerted over the voice coil and the power transferred to the cone.

Sealed Box Volume: The recommended sealed box volume is 1.25 ft³ (from 0.85 ft³ to 1.75 ft³ is acceptable).

Vented Box Volume: The recommended vented box volume is 1.5 ft³ with a 3″ diameter x 6-1/2″ long port (1.25 ft³ to 2.0 ft³ is acceptable).

Single Reflex Bandpass Volume: The recommended bandpass box has a sealed chamber volume of 0.56 ft³ and a ported chamber volume of 3.1 ft³, with a slot port measuring 15-3/4″ x 5-7/8″ x 12-3/4″. Other acceptable designs keep the same sealed chamber size and the ported chamber changes to 2.8 ft³ with a 15-3/4″ x 9-1/2″ x 12-3/4″ slot port, or 3.5 ft³ with a 10″ x 2-3/8″ x 21″ slot port.

 

 Only Php 4,800.00

INQUIRY FORM

We are eager to discuss you business needs, and answer any questions you may have. Kindly contact us here or full up the form

Error: Contact form not found.